Inventory Unit Detail

2023 Morbark Eeger Beever™ 1415 Brush Chipper

Call for Price

Call for Price

Key Features

New/Used New
Availability In Stock
LocationNewtown Power Equipment
Condition Excellent

Product Features

Description

Perfect for utility line clearing, residential tree services, rental yards and municipalities, this powerful and compact model is easy to maneuver. The Eeger Beever 1415 is also available with tracks for right of way clearing, highway clean-ups and hard to reach areas requiring a self-propelled unit for material access. The direct driven dual feed wheel system with serrated teeth and knife bar combination and end cap ripper teeth allow positive material feeding and reduced material wrapping around the feed wheel shaft for increased feeding efficiency.

Features
  • Infeed: The 60" wide x 31" (152.4 cm x 78.74 cm) high chute opening and 15" wide x 14" (38.1 cm x 35.56 cm) high throat opening allows for easy feeding of branchy material and reduced saw labor.
  • 360° Swivel Discharge: 360° swivel discharge with chip deflectors puts chips right where they're needed without removing the chipper from the tow vehicle.
  • Hydra-Lift System: The Hydra-Lift™ compression system with spring-assisted down pressure aids in feeding difficult limbs.
  • Track Undercarriage Option: Take the chipper to the material with a two-speed, 72" long x 11.5" wide (182.9 cm x 29.2 cm), turf-friendly rubber track undercarriage and 4.95 PSI (34.1 kPa) ground pressure.
Specifications
  • Height: 9' wheeled/8' tracked
  • Width: 6'2" wheeled/6'3" tracked
  • Length: 15'6" wheeled/13'9" tracked
  • Gross Weight (Approximate): 7,000 lb wheeled/8,200 lb tracked
  • Suspension: 7,000 lb Torsion
  • Infeed Opening (Height X Width): 31" x 60"
  • Throat Opening (Height X Width): 14" x 15"
  • Drum (Width X Diameter): 14.5" x 21.4"
  • Engine: Isuzu or PSI
  • Horsepower: 48-145 HP
  • Fuel Capacity: 24.5 gallons
  • Hydraulic Capacity: 17 gallons
  • Frame: 8.2 lb, 6" channel wheeled/2" x 4" tubular tracked
  • Tires: (2) 235/80Rx16
  • Hitch: 2.5" Pintle
  • Optional Tracks: CAT 303.5 undercarriage with 300 mm rubber tracks
  • Tracks Ground Pressure: 4.95 PSI
  • Maximum Chipping Capacity: 12"
  • Tracks Ground Speed (Low/High): 1.0/1.8 MPH

Engine

Engine Manufacturer Isuzu or PSI
Horse Power 48-145 HP

General

Chipping Capacity 12 in.

Shopping Tools